Help Refine Your Search
 
 




Proper Measurement of Flex Addtitive
It is important to add Flex Additive to each layer of paint film for optimum performance. Refer to ...


Paint Gun Maintenance
Utilize the gun washer to assist in the cleansing and maintenance of the paint gun. To ensure a mor...


Proper Use of a Mixing Stick
Using an incremental paint mixing stick, one can mix different quantities of paint while using the s...


Personal Protective Equipment
Wearing an anti-static spray suit along with gloves will help to dissipate electro-static charge and...


Proper Use of Tack Rags
Tack rags are used prior to the application of paint products. Their purpose is to eliminate any co...


Cleaners for Plastic Parts
R-M 902 is a plastic prep cleaner designed to remove mold released agents, silicone, wax, grease, an...


Finding and Using Technical Data Sheets
To access the tech data sheet for an individual product, go to the products tab, and then the R-M ta...


Non-Plastic Parts Preparation
The first step in refinishing a non-plastic part is washing the entire part in soap and water. Afte...


Proper Baking of Coatings
After applying the last coat of paint material for a part, turn the booth onto “bake” for the approp...


Removing Defects from Finished Coating
After proper cool down, wet the surface of the panel to be sanded. Begin sanding to remove paint de...


Curing VP126 with UV light
After a minimum of 3 minutes flash time, apply the UV light at a distance of 3 to 10 inches for 3 to...


Improper Mixing of Products
Remember the importance of proper mixing the paint product. Do not estimate the hardener. This can...


Analytical Determination of Paint Samples
A stereo microscope determines sand scratches and film build and can take a picture of the cross sec...


Proper Application of VP126
...


Testing Wet Film VP126
Use a wet mil gage to determine the amount of paint film that has been applied to the surface. The ...


Product Wall Chart
R-M wallcharts help to make obtaining information quick and easy for a paint technician. You can lo...